* Images may depict USA plugs. All Yeti's and chargers will come with 1 x AU type 230w output and AU power supplies.
10-AMP CHARGE CONTROLLER
- Designed to monitor and regulate solar input for 12V batteries. For solar charging with 100 Watts and below, we recommend the 10-Amp Charge Controller. For solar charging with more than 100 Watts, we recommend the 20-Amp Charge Controller.
- Charge Controller comes with an integrated 8mm Connector. To connect and charge a 12V battery, you must purchase an additional cable adaptor.
- Will not work with Yeti X Power Supply.
What's In the Box
- 10A Charge Controller
- Spade to 8mm Cable
PORTS
- Input/Output terminal: M5 terminals
- Input Port: Solar Port: (blue, 8mm): 14-22.5V up to 10A
- Fuse: 15A replaceable
GENERAL
- Product SKU: 96100
- Weight: 14.4 oz (408 g)
- Dimensions: 6.10 x 3.90 x 1.02 in. (15.5 x 9.91 x 2.6 cm)
- IP Grade: IP65
- Spade to 8mm Cable Length: 3 ft
- Operating temperature: -25 to 50°C/ -13 to 122°F
- Warranty: 12 Months
- Certs: IC, FCC, CE-EMC, CE-LVD
BATTERY DETAILS
- Rated solar panel amps GZ-10: 10A
- Normal input solar cell array voltage: 15-22V
- Max solar cell array voltage (output has no load): 25V
- Lowest operating voltage at solar or battery side: 8V Minimum
- Charging Characteristics:
- Start Voltage at 25°C: 3-10V
- Charge Voltage at 25°C:
- LTO battery: 14.0V
- Gel battery: 14.1V
- LiFePO4 battery: 14.4V
- Charge Voltage at 25°C: AGM battery-14.4V
- WET battery: 14.7V
- Calcium battery: 14.9V
- Equalizing Voltage at 25°C: WET or Calcium battery-15.5V
- Float Voltage at 25°C:
- Gel, AGM, WET, Calcium batteries-13.6V
- LTO and LiFePO4 batteries-13.4V
- Battery temperature compensation coefficient: -24mV/°C